User's Guide

ME910C1 HW User Guide
1VV0301351 Rev. 2 Page 22 of 81 2017-07-19
NOTE:
The Operating Voltage Range MUST never be exceeded;
care must be taken when designing the application’s
power supply section to avoid having an excessive voltage
drop. If the voltage drop is exceeding the limits it could
cause a Power Off of the module.
The Power supply must be higher than 3.10 V to power on
the module.
Overshoot voltage (regarding MAX Extended Operating
Voltage) and drop in voltage (regarding MIN Extended
Operating Voltage) MUST never be exceeded;
The “Extended Operating Voltage Range” can be used only
with completely assumption and application of the HW
User guide suggestions.