User's Manual

34
1.1.22 Configurable RRC band
scan order, also add support
for LTE cfgs
1.1.23 Saving MRU/ Band scan etc.
info while in
suspend/resume/power-save
states - WCDMA
1.1.24 Gobi - Saving MRU/band
scan info (3GPP2)
1.1.25 Gobi - Saving MRU/band
scan info (GERAN,
WCDMA)
1.1.26 Gobi - Add QMI CAT
Command for terminal
profile property.
Add
QMI_CAT_SEND_ENVELOP_CMD_RSP.
Add optional TLV in
QMI_CAT_SEND_ENVELOP_CMD_RSP
to report envelope response from card in
raw format and corresponding status
words
1.1.27 Multiple carrier support in
NV
Provides the ability for a single modem
image to support multiple carriers via
per-carrier configuration files that are
downloaded to the modem. This is a Gobi
modem capability
1.2 Modem (1X)
1.2.1 Enable complete IS-683C
OTA message support
FEATURE_IS683C_OTASP makes the
following messages compliant with
IS683C standard:
 Protocol Capability Response message
 SSPR Configuration Request/Response
message
1.2.2 OTASP support for all band
classes
Expand the OTASP support to all the
bands supported by the 3GPP2
C.S0057-B
1.2.3 Multimode: OTASP/OTAPA
–Runtime Detection of
OTASP Numbers
Provide capability of using custom
numbers with OTASP calls via UI through
Centralized Call Control support
1.3 Modem (EVDO)
1.3.1 Dedicated Data Transfer
Mode (DDTM)
Allows the user to control the 1X access
at runtime when the 1xEV-DO data call is
made
1.3.2 EV-DO Data Activity Based
Adaptive Receive Diversity
Disable EV-DO diversity when no FL data
is arriving. When data resumes,
immediately bring up diversity. This saves
power during the period of waiting for
dormancy for applications that don't
explicitly close the connect
1.3.3 Rx Diversity during 1x
Access
Enable 1x Rx Diversity during 1x Access if
Rx Diversity for Traffic Has Been Enabled