User's Manual

32
5.2 RF min. Rx sensitivity specifications
Table 5-2 Conducted min. receiver sensitivity
Specification Min. Typ.
Max.
(compliance with standard)
unit
LTE (B2)@10MHz / -101 -95 dBm
LTE (B4) @10MHz / -102 -97 dBm
LTE (B5) @10MHz / -102.5 -95 dBm
LTE (B13) @10MHz / -103 -94 dBm
LTE (B17) @10MHz / -102.5 -94 dBm
LTE (B25) @10MHz / -101 -93.5 dBm
WCDMA (B1) / -110 -106 dBm
WCDMA (B2) / -109 -104 dBm
WCDMA (B4) / -110 -106 dBm
WCDMA (B5) / -111 -104 dBm
WCDMA (B8) / -110 -103 dBm
CDMA (BC0) / -109 -104 dBm
CDMA (BC1) / -109 -101 dBm
GSM850/900 / -110 -102 dBm
GSM1800/1900 / -110 -100 dBm
GPRS 850/900 (CS1) / -110 -102 dBm
GPRS 1800/1900 (CS1) / -110 -100 dBm
EDGE 850/900 (CS5) / -107 -98 dBm
EDGE 1800/1900 (CS5) / -105 -98 dBm
GPS/GLONASS tracking sensitivity / -157 -152 dBm
Remark:
a. It has 3dB margin at least refer to 3GPP standard or CDMA standard.
b. The typical value of LTE was measured as combine Rx sensitivity which was follow test
setup of 3GPP standard (TS36.521 charter 7.2 and charter 7.3.5), the test setup is follow
TS36.508 Annex A Figure A.3.
SS
RX/TX
RX
UE under Test
RX/TX
Ior
Îor
Splitter/
combiner