User Guide

LM960 HW Design Guide
1VV0301485 Rev. 15 Page 65 of 88 2020-08-13
Antenna connection
7.5.1. Support bands on antenna ports
The LM960/LM960A18 has an assigned antenna port depending on the frequency band.
The supported bands on each antenna port are:
 Primary RF antenna #0: B1, B2(B25), B3, B4(B66), B5(B26,B18,B19), B8,
B12(B17), B13, B14, B20, B28, B29, B39, B71, B41 for 4 x 4 MIMO
 Primary RF antenna #1: B7, B30, B32, B38, B40, B41, B42, B43, B46, B48,
B2(B25) for 4 x 4 MIMO, B4(B66) for 4 x 4 MIMO
 Secondary RF antenna #0: B1, B2(B25), B3, B4(B66), B5(B26,B18,B19), B8,
B12(B17), B13, B14, B20, B28, B29, B39, B71, B41 for 4 x 4 MIMO / GNSS
 Secondary RF antenna #1: B7, B30, B32, B38, B40, B41, B42, B43, B46, B48,
B25(B2) for 4 x 4 MIMO, B66(B4) for 4 x 4 MIMO
 GNSS antenna: Dedicated GNSS
Please refer to the picture below for their position:.
The LM960A9-P has an assigned antenna port depending on the frequency band.
The supported bands on each antenna port are:
 Primary RF antenna #1: B42, B43, B48
 Secondary RF antenna #0: GNSS
 Secondary RF antenna #1: B42, B43, B48
 GNSS antenna: Dedicated GNSS
Please refer to the picture below for their position:.
The LM960A9-P is not mounted with a primary 0 antenna connector.