User Guide

LM960 HW Design Guide
1VV0301485 Rev. 15 Page 61 of 88 2020-08-13
Information – I2C is supported only on from Modem side as SW
emulation of I2C on GPIO lines.
Please contact Telit Customer support for further information.
Information – If the I2C interface is not used, the signals can be left
floating.
Using the Temperature Monitor Function
The Temperature Monitor allows to monitor the module’s internal temperature and, if
properly set (see the #TEMPSENS command in LM960 AT Commands Reference Guide),
raises a GPIO to High Logic level when the maximum temperature is reached.