User Guide

LM960 HW Design Guide
1VV0301485 Rev. 15 Page 52 of 88 2020-08-13
Usually dying gasp feature is completed less than 1 second after triggered.
This may take longer depending on network conditions.
Communication ports
Below table summarizes hardware interfaces available of the LM960 module.
LM960 Hardware Interfaces
6.6.1. USB Interface
The LM960 module includes super-speed USB3.0 with high-speed USB2.0 backward
compatibility. It is compliant with Universal Serial Bus Specification, Revision 3.0 and can
be used for control and data transfers as well as for diagnostic monitoring and firmware
update.
Interface LM960
USB Super-speed USB3.0 with high-speed USB2.0
PCIe Peripheral Component Interconnect Express
USIM x2, dual voltage each (1.8V/2.85V)
Control Signals W_DISABLE_N, WAKE_N, WAN_LED_N
GPIO X8, GPIO
I2C I2C (optional)
Antenna ports 4 for Cellular, 1 for GNSS