User Guide

LM960 HW Design Guide
1VV0301485 Rev. 15 Page 50 of 88 2020-08-13
6.4.1. Graceful Reset
To gracefully restart the LM960 module, AT#REBOOT AT command must be sent through
USB port.
Graceful Reset by AT#REBOOT
6.4.2. Unconditional Hardware Reset
To unconditionally restart the LM960 module, the SYSTEM_RESET_N pin must be
asserted low more than 1 seconds and then released.
Unconditional Hardware Reset by SYSTEM_RESET_N Pad
Information – Unconditional Hardware Reset must be used only as an
emergency exit procedure, and not as a normal power-off operation.