User Guide

LM960 HW Design Guide
1VV0301485 Rev. 15 Page 14 of 88 2020-08-13
2. GENERAL PRODUCT DESCRIPTION
Overview
The aim of this document is to present possible and recommended hardware solutions
useful for developing a product with the Telit LM960 Mini PCIe module.
In its most basic use case, LM960 can be applied as a wireless communication front-end
for mobile products, offering mobile communication features to an external host CPU
through its rich interfaces.
LM960 is available in hardware variants as listed in Applicability Table
The designated RF band sets per each variant are detailed in Section 2.2, Product
Variants and Frequency Bands.
Product Variants and Frequency Bands
The operating frequencies in LTE & WCDMA modes conform to the 3GPP specifications.
2.2.1. RF Bands per Regional Variant
This table summarizes RF bands and CA combinations supported on each SW image of
LM960/LM960A18 and LM960A9-P.
2.2.1.1. LM960 RF Bands and Carrier Aggregation
AT&T LTE FDD LTE TDD HSPA+
Bands 2, 4, 5, 12, 14, 29(DL), 30, 66 46(DL) 2, 5
AT&T CA combos
2DL CA
CA_[2A]-[2A], CA_[2A]-[4A], CA_2A-5A, CA_2A-12A, CA_2A-14A, CA_2A-29A,
CA_2A-30A, CA_[2A]-46A, CA_[2A]-[66A], CA_2C, CA_[4A]-[4A], CA_4A-5A,
CA_4A-12A, CA_4A-29A, CA_4A-30A, CA_[4A]-46A, CA_5A-30A, CA_5A-66A,
CA_5B, CA_12A-30A, CA_12A-66A, CA_12B, CA_14A-30A, CA_14A-66A,
CA_29A-30A, CA_29A-66A, CA_30A-66A, CA_[66A]-[66A], CA_66B, CA_66C
3DL CA
CA_2A-2A-5A, CA_[2A]-2A-12A, CA_2A-2A-14A, CA_2A-2A-30A, CA_2A-2A-66A,
CA_[2A]-4A-4A, CA_2A-[4A]-[4A], CA_[2A]-4A-5A, CA_2A-[4A]-5A,
CA_[2A]-4A-12A, CA_2A-[4A]-12A, CA_2A-4A-30A, CA_2A-5A-30A,
CA_[2A]-5A-66A, CA_2A-5A-[66A], CA_2A-12A-30A, CA_[2A]-12A-66A,
CA_2A-12A-[66A], CA_2A-14A-30A, CA_2A-14A-66A, CA_2A-29A-30A,
CA_2A-30A-66A, CA_2A-46C, CA_2A-66A-66A, CA_[4A]-4A-5A, CA_[4A]-4A-12A,
CA_4A-4A-30A, CA_4A-5A-30A, CA_4A-12A-30A, CA_4A-12B, CA_4A-29A-30A,
CA_5A-30A-66A, CA_5A-66A-66A, CA_5A-66C, CA_12A-30A-66A,
CA_12A-[66A]-66A, CA_14A-30A-66A, CA_14A-66A-66A, CA_29A-30A-66A,
CA_29A-66A-66A, CA_30A-66A-66A