User Guide

LM960 HW Design Guide
1VV0301485 Rev. 3 Page 32 of 74 2018-12-14
PIN Signal I/O Function Type Comment
28 VREG_L6_1P8 O Reference Voltage power 1.8V
Internal LDO for GNSS bias
The LDO for GNSS bias is applied inside the LM960 model.
The voltage supply come from LM960’s LDO to GNSS active antenna.
This table lists the LDO for GNSS bias of LM960.
LM960 Reference Voltage when VBATT is 3.3
Symbol Parameter Min Typ Max Unit
V
GNSS DC bias
Voltage of Internal LDO for GNSS bias 2.9 3.1 3.15 [V]
I
GNSS DC bias
Current of Internal LDO for GNSS bias - - 100 [mA]