User's Manual

LE940B6 Hardware User Guide
1VV0301331 Rev. 1.8 - 2017-03-15
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
96 of 104
12. Packing System
The LE940B6 module is packed on trays.
The tray is JEDEC compliant, injection molded antistatic Modified Polyphenylene ether (MPPO). It
has good thermal characteristics and can withstand the standard baking temperature of up to
125°C, thereby avoiding the need of handling the modules if baking is required. The trays are
rigid, thus providing mechanical protection against transport stress. In addition, they are re-
usable and so environmentally sustainable.
There are 2 (two) antistatic rubber bands that enclose each envelope.
The carton box is rigid, thus offering mechanical protection. The carton box has one flap across
the entire top surface. It is sealed with tape along the edges of the box.
Table 41: Tray Packing
Modules per
Tray
Trays per
Envelope
Modules per
Envelope
Envelopes per
Carton Box
Modules per
Box
21 5+ 1 empty 105 4 420
Table 42: Packing Quantities
Order Type Quantity
Minimum Order Quantity (MOQ) 21
Standard Packing Quantity (SPQ) 420