User's Manual
LE940B6 Hardware User Guide
1VV0301331 Rev. 1.8 - 2017-03-15
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
17 of 104
2. General Product Description
2.1. Overview
LE940B6 is Telit’s platform for automotive telematics on-board units (OBU's) for applications,
such as automotive telematics and eCall, based on the following technologies:
• 4G cellular for voice and data communication
• GNSS (optional) - GPS, GLONASS, BeiDou, Galileo, QZSS, for positioning service
• Embedded security
• Designed for automotive markets
1
quality needs
In its most basic use case, LE940B6 can be applied as a wireless communication front-end for
telematics products, offering GNSS and mobile communication features to an external host CPU
through its rich interfaces.
LE940B6 can further support customer software applications and security features. LE940B6 is
based on a Yocto Linux system running on an application processor. Thanks to a dedicated
application processor and embedded security resources, product developers and manufacturers
can create products that guarantee fraud prevention and tamper evidence without extra effort
for additional security precautions.
LE940B6 can be self-sufficient and serve as a fully integrated solution for applications, such as
location-based cellular telematics, navigation, road pricing and eCall. In such a case, the customer
would simply complement the module with a power supply, speaker amplifier, microphone,
antennas, and an HMI (if applicable).
LE940B6 is offered with different regional variants according to the list in Table 1: Applicability
Table.
2.2. Applications
LE940B6 can be used for telematics applications where tamper-resistance, confidentiality,
integrity, and authenticity of end-user information are required, for example:
• Emergency call
• Telematics services
• Road pricing
• Pay-as-you-drive insurance
• Stolen vehicles tracking
• Internet connectivity
1
In accordance with Telit’s Robustness Validation, using AEC-Q100-defined qualification tests