User's Manual

LE920 Hardware User Guide
1vv0301026 Rev.8 2015-01-03
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 82 of 88
16. Packing system
The Telit LE920 is packaged on trays. The tray is JEDEC compliant, injection molded antistatic Modified
Polyphenylene ether (MPPO). It has good thermal characteristics and can withstand a the standard baking
temperature up to 125°C, thereby avoiding handling the modules if baking is required. The trays are rigid, thus
providing more mechanical protection against transport stress. Additionally they are re-usable and so
environmentally sustainable.
There are 2 (two) antistatic rubber bands that enclose each envelope.
The carton box is rigid, thus offering mechanical protection. The carton box has one flap across the whole top
surface. It is sealed with tape along the edges of the box.
Tray
in each
tray
inside each
envelope
inside each
carton box
Modules/tray
Description
modules/
tray
trays/
envelope
modules/
envelope
envelopes/
carton box
modules/
box
xE920
packaging
JEDEC Tray
24
5+ 1 empty
120
4
480
Qty
Minimum Order
Quantity (MOQ)
120
Standard Packing
Quantity (SPQ)
480
Each tray contains 24 pieces as shown in the following picture: