User's Manual
LE910 V2 HARDWARE USER GUIDE 1VV0301200 Rev.2 Preliminary • 2015-08-04 61 of 81
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
6.5 Antenna Diversity Requirements
This product is including an input for a second Rx antenna to improve radio sensitivity. This function is named
Antenna Diversity. The diversity antenna for a Telit LE910 V2 device shall fulfil the following requirements:
LE910-NA V2
Item
Value
Frequency range
Depending by frequency band(s) provided by the network
operator, the customer shall use the most suitable antenna for
that/those band(s)
Bandwidth
60 MHz in LTE/WCDMA Band 2
45 MHz in LTE Band 4
25 MHz in LTE/WCDMA Band 5
35 MHz in LTE Band 8 / GSM900
15 MHz in LTE Band 12
10 MHz in LTE Band 13
12 MHz in LTE band 17
Impedance
50 ohm
VSWR recommended
≤ 2:1 (limit to obtain max sensitivity)
LE910-AU V2
Item
Value
Frequency range
Depending by frequency band(s) provided by the network
operator, the customer shall use the most suitable antenna for
that/those band(s)
Bandwidth
75 MHz in LTE Band 3
70 MHz in LTE Band 7
45 MHz in LTE Band 28
Impedance
50 ohm
VSWR recommended
≤ 2:1 (limit to obtain the maximum sensitivity)