User's Manual
LE910 V2 HARDWARE USER GUIDE 1VV0301200 Rev.2 Preliminary • 2015-08-04 22 of 81
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
4.2 Power Consumption
The reported values in the following table has to be considered preliminary:
Mode
Average (mA)
Mode Description
Switched Off
94uA
Module supplied but switched off
AT+CFUN=5
1.3mA
(WCDMA)
EGPRS mode
550mA
Typical (max UL throughput, class 33, 3.80V
supply)
HSUPA mode
550mA
Typical (max UL throughput, 3.80V supply)
LTE mode
550mA
Typical (max UL throughput, 3.80V supply)
NOTE:
The electrical design for the Power supply should be made ensuring it will be
capable of a peak current output of at least:
0.8 A for WCDMA and LTE mode (3.80V supply).
2A for GSM mode (3.80V supply).