User's Guide

LE910 V2 HARDWARE USER GUIDE 1VV0301200 Rev.8 • 2016-10-07 64 of 84
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
6.5 Second Antenna Requirements
This product is including an input for a second Rx antenna to improve radio sensitivity and interference cancellation
for better data throughput. This function is named Antenna Diversity in case of 2G and 3G modes. The seconda
antenna for a Telit LE910 V2 device shall fulfil the following requirements:
LE910-NA V2
LE910-NA1
Item
Value
Frequency range
Depending by frequency band(s) provided by the network
operator, the customer shall use the most suitable antenna for
that/those band(s)
Bandwidth
60 MHz in LTE/WCDMA Band 2
45 MHz in LTE Band 4
25 MHz in LTE/WCDMA Band 5
15 MHz in LTE Band 12
10 MHz in LTE Band 13
Impedance
50 ohm
VSWR recommended
≤ 2:1 (limit to obtain max sensitivity)
LE910-SV V2
LE910-SV1
LE910-SVL
Item
Value
Frequency range
Depending by frequency band(s) provided by the network
operator, the customer shall use the most suitable antenna for
that/those band(s)
Bandwidth
60 MHz in LTE/WCDMA Band 2 (not applicable to LE910-SVL)
45 MHz in LTE Band 4
10 MHz in LTE Band 13
Impedance
50 ohm
VSWR recommended
≤ 2:1 (limit to obtain max sensitivity)