User's Guide

LE910 V2 HARDWARE USER GUIDE 1VV0301200 Rev.8 • 2016-10-07 22 of 84
Reproduction forbidden without Telit Communications PLC written authorization – All Rights Reserved
NOTE:
The electrical design for the Power supply should be made ensuring it will be
capable of a peak current output of at least:
0.8 A for WCDMA and LTE mode (3.80V supply).
2A for GSM mode (3.80V supply).
NOTE:
The reported values are an average among all the product variants and bands
for each network wireless technology.
The support of specific network wireless technology depends on product
variant configuration.