Manualshelf

User's Manual

ManualsBrandsTelit Communications ManualsElectronicsLE910-NAG LTE/HSPA/GPRS/GSM module supporting frequency bands GSM/GPRS 850/1900, HSPA FDD II and FDDV and LTE FDD 2, 4, 5 and 17
61626364656667686970
LE910 Hardware User Guide
1vv0301089 Rev.7 – 25-10-2015
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 68 of 88
15 Application guide
15.1 Download and Debug Port
One of the following options should be chosen in the design of host application in order to
download or upgrade the Telit software and debug LE910 when LE910 is already mounted
on a host system.
Users who use both UART and USB interfaces to communicate with LE910
- Must implement a USB download method in a host system for upgrading LE910 when it
is mounted.
Users who use USB interface only to communicate with LE910
- Must arrange for a USB port in a host system for debugging or upgrading LE910 when it
is mounted.
Users who use UART interface only to communicate with LE910
- Must arrange for a USB port in a host system for debugging or upgrading LE910 when it
is mounted.