User's Guide

LE910Cx HW User Guide
Doc#: 1VV0301298
Rev. 13.0 Page 91 of 124 2019-07-15
10. Mounting the Module on your Board
General
The LE910Cx module is designed to be compliant with a standard lead-free soldering
process.
Finishing & Dimensions
The below figure shows the mechanical dimensions of the LE910Cx module.
Figure 21: LE910Cx Mechanical Dimensions (Bottom View)
4 x Route
Inhibit
Pin
B1
Lead-free Alloy:
Surface finishing Ni/Au for all solder pads