User's Guide

LE910Cx HW User Guide
Doc#: 1VV0301298
Rev. 13.0 Page 123 of 124 2019-07-15
Revision
Date
Changes
1.01
2017-02-16
Adding Section 14: FCC/ISED Regulatory notices
Changing Document History section from 14 to 15
1.0
2016-12-22
Section 1.5 - Updated “Related Documents” table
Section 5.3.4 – Added Figure for SHDN_N power down timing
Section 8.5.3 – Added clarification about VMMC
Section 9.7 - Added GNSS characteristics
0.6
2016-12-07
Remove all China variant related information
0.5
2016-12-02
Added section 9.2 to better describe SW_RDY signal
Minor modifications per typos and improved description
Renaming of SHDN_N pin
0.4
2016-11-30
Updated band support table
Updated WIFI application note doc info
Added note related to future compatibility related to few pins
Updated section 3.2 - Signals That Must Be Connected
Updated pinout and pin description
Updated pinout layout (Figure 2)
Remove HW RESET description section
Updated serial port 2 section
Updated SPI port section
Updated 1.8V pads pull info
Updated AUX UART section
Updated GPIO section
Updated mechanical drawing (Cosmetic)
0.3
2016-11-13
Added information for GPIO usage as Interrupt
Added clarification for AUX_UART location and backward
compatibility
0.2
2016-09-05
Minor edits
0.1
2016-08-30
First Draft