User's Guide

LE910Cx HW User Guide
Doc#: 1VV0301298
Rev. 13.0 Page 122 of 124 2019-07-15
Revision
Date
Changes
1.10
2017-12-27
General spelling and grammar edits throughout the document
Section 2.3 – Updated features list table.
Section 2.4 - Fixed typo in section and inside block diagram.
1.09
2017-12-07
Section 14.1 – Updated LE910C1 NA 850MHz Max antenna
gain.
Section 6.2.2 – Corrected Class12 to Class10.
1.08
2017-11-14
Section 2.6.2 - Changed B41 to B41M
Section 2.7 – Renamed from Sensitivity to RF parameters and
added TX output power section (2.7.2)
Section 2.8 – Added note regarding label thickness
Section 3.1 - Removed duplication of description related to
USB_VBUS.
Section 5.2 – Added clarification regarding ON_OFF.
Section 7.5 – Added note related to GPS port.
Section 8.1 – Added clarification regarding VBUS supply.
Section 8.1.1 – Added clarification regarding OTG.
Section 8.3.1 – Added clarification regarding ETH_INT_N pin.
1.07
2017-07-23
Adding a note for power supply section
1.06
2017-07-10
Renaming the product from LE910Cx to LE910C1
1.05
2017-06-18
Section 6.1 – Updated power consumption tables
1.04
2017-05-25
Section 14.1 – Added Labelling Requirements for the Host
device
1.03
2017-04-23
Section 11.4:
• Updated ESD values
• Updated Reference document table
Section 8.3 - Updated Ethernet control interface information
Section 8.5.2 – Added note related to I2C
Section 2.6.2 – Updated table 4 with B25 information.
Section 14.1:
• Added LE910C1 NS Max antenna gain.
• Added LE910C1 NS FCC ID & IC number.
1.02
2017-04-03
Section 14.1 – updated column “Band” to “Frequency Band” in
Wireless notice table
Section 8.4.1 - Added note regarding DTR