User's Guide

LE910Cx HW User Guide
Doc#: 1VV0301298
Rev. 13.0 Page 34 of 124 2019-06-07
PAD Signal Notes
N15 C103/TXD If not used, connect to a
Test Point
M15 C104/RXD If not used, connect to a
Test Point
L14 C105/RTS If flow control is not used,
connect to GND
P15 C106/CTS If not used, connect to a
Test Point
D15 TX_AUX If not used, connect to a
Test Point
E15 RX_AUX If not used, connect to a
Test Point
K1 Antenna MAIN antenna
F1 ANT_DIV DIV antenna
R9 ANT_GPS GPS antenna
C4, C5, C6, C7, D3, E3, G3, K4,
L4, P11
Reserved Connect to a Test Point for
Telit internal use
L15 GPIO_09 If not used, connect to a
Test Point
M9 WCI_RX If not used, connect to a
Test Point