User's Guide

LE910Cx HW User Guide
Doc#: 1VV0301298
Rev. 13.0 Page 121 of 124 2019-06-07
Revision Date Changes
4 2018-08-20 Table 1 & 4 - Added LE910C4-EU variant
Section 2.3 – Updated SIM interface max speed
Declared HSIC interface as optional throughout the document
Section 2.6.2 – Updated RF frequency table
Section 6.2 – Added clarification related to DRX and CFUN=5
Section 8.1 - Corrected Typo related to USB_VBUS pad
number
Section 8.4.1- Clarified note about DTR pin
3 2018-07-18 Section 2.8.1 - Fixed typo related to module size
General - Align cross reference links across the document
2 2018-06-14 Template update and pagination update
Section 1.5 – Updated AT Command UG reference
Section 2.6.1 - Updated Band support table
Section 6.3.2 - Updated Thermal design guidelines
Section 8.3 - Removed “optional” term from Ethernet interface
1.13 2018-05-17 Added new variant LE910C1-NF
Section 2.6.1 - Added band 66 support for LE910Cx-NF
Section 2.6.2 - Added band 66 and band 71 to frequency table
Section 3.1 - Updated value of SIM internal pullup
Section 8.3 – added clarification regarding Ethernet control
interface logic levels
Section 8.5.4 – Removed note related to WIFI_SDRST
Section 9.7 - Updated GNSS characteristics
1.12 2018-03-18 Replaced LE910C1 with LE910Cx throughout the document
Section 2.6.1 and Table 1 - Added LE910C1-EU and
LE910C4-NF variants
Section 8.7 – Added notes related to GPIO pullups
Section 10.7.2 - Added clarification related to flux cleaning
1.11 2018-02-22 Section 5.3.2 – Updated section name
Section 5.4 – Added section for clarifying power down and
power off procedures
Section 8.6.1 – Update for PCM slave mode
1.10 2017-12-27 General spelling and grammar edits throughout the document
Section 2.3 – Updated features list table.
Section 2.4 - Fixed typo in section and inside block diagram.