User's Guide

LE866 HARDWARE USER GUIDE 1vv0301210 Rev.0 Preliminary 2015-09-02 41 of 68
Reproduction forbidden without Telit Communications PLC written authorization All Rights Reserved
AT#SIMINCFG
Use the AT command AT#SIMDET=2 to enable the SIMIN detection
Use the AT command AT&W0 and AT&P0 to store the SIMIN detection in the common profile.
NOTE:
Don’t use the SIM IN function on the same pin where the GPIO function is
enabled and vice versa!
External SIM Holder
Please refer to the related User Guide (SIM Holder Design Guides, 80000NT10001a).