User's Manual

xE70-915 RF Module User Guide
1VV0301106 rev.3 – 2015-03-04
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 7 of 34
1. Introduction
1.1. Scope
Scope of this document is to present the features and the application of the Telit xE70-915
radio modules.
1.2. xE70-915 Product Description
The xE70-915 module is a multi-channel radio board, delivering up to 500mW in Frequency
Hopping technology. It is compliant with the FCC Code of Federal Regulations [1] in the 915
MHz ISM unlicensed frequency band.
It is delivered with preloaded protocol stack:
“x” Product name Stack functionality
L LE70-915 FH Star Network
xE70-915 is pin-to-pin compatible with LE, NE and ME modules working at different
frequencies, in particular xE50-868 and xE70-868.
xE70-915 is also pin-to-pin compatible with Telit ZE Family (ZigBee 2007 and ZigBee PRO
stack).
1.3. Audience
This document is intended for developers using Telit xE70-915 radio modules.
1.4. Contact Information, Support
For general contact, technical support, to report documentation errors and to order manuals,
contact Telit Technical Support Center (TTSC) at:
[e-mail]
[e-mail]
[e-mail]
[e-mail]
Alternatively, use:
http://www.telit.com/en/products/technical-support-center/contact.php
For detailed information about where you can buy the Telit modules or for recommendations
on accessories and components visit:
http://www.telit.com