User's Manual

xE70-915 RF Module User Guide
1VV0301106 rev.3 – 2015-03-04
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 10 of 34
3. General Features
3.1. Main Functionalities
The xE70-915 module is a complete solution from serial interface to RF interface. The xE70-
915 module has a digital part and a RF part. The radio link is a Half Duplex bi-directional
link.
The digital part has the following functionalities:
• Communication interface
• I/O management
• Micro controller with embedded Telit Software Stack
The RF part has the following functionalities:
• Frequency synthesis
• Front-end
• Low noise reception
• Power amplification
• Packet handling
3.2. Software
The xE70-915 module is provided pre-flashed with Telit in-house stack.
Please refer to Protocol Stack User Guides [2] for detailed information.
3.3. Temperature Requirements
Minimum Typical Maximum Unit
Operating
Temperature - 40 25 + 85 °C
Relative humidity @ 25°C 20 75 %
Storage
Temperature - 40 25 + 85 °C