User Manual

<CR><LF><text>
where:
<index> - message index position on the storage
<stat> - status of the message
"REC UNREAD" - new message
"REC READ" - read message
"STO UNSENT" - stored message not yet sent
"STO SENT" - stored message already sent
<oa/da> - sender number/destination number
<tooa/toda> - type of number <oa/da>
145 - international number (contains "+" character)
129 - national number
<length> - length of the message text in characters
<text> - message text
Note: If status of the message is 'received unread', status in the storage changes to 'received
read'.
For example:
1- Let us assume you want to list all the SMS received read that are stored. We suppose you
already have set up the device for text SMS mode as described on the previous paragraphs:
command
AT+CMGL="REC READ"
response:
+CMGL: 5, "REC READ","[phone]"
Telit Test Message for Text Mode SMS RECEIVING.
+CMGL: 8, "REC READ","[phone]"
Telit Second Test Message for Text Mode SMS RECEIVING.
OK
In this case the SMS group was successfully read, the messages Received UNREAD were
two in the position indexes 5 & 8. The optional parameters <tooa/toda> and <length> were
not shown.
GSM Standard specifies two different types of SMS:
 SMS Point to Point (SMS/PP),
 SMS Cell Broadcast (SMS/CB).