User Manual

1 - RP set
Validity Period numerical if in relative format or string if in absolute format
This parameter represents the validity period for the SMS after which the message must be
disregarded instead of being delivered.
If in relative format (see VPF parameter) it is an integer:
0 to 143 - corresponding to (VP + 1) x 5 minutes
144 to 167 - corresponding to 12 hours + ((VP -143) x 30 minutes)
168 to 196 - corresponding to (VP - 166) x 1 day
197 to 255 - corresponding to (VP - 192) x 1 week
If in absolute format it is a string in the format:
"gg/MM/YY,hh:mm:ss±tz"
where
gg day of expiration (2 characters)
MM month of expiration (2 characters)
YY year of expiration (2 characters)
hh hour of expiration (2 characters)
mm minute of expiration (2 characters)
ss second of expiration (2 characters)
± sign of the time zone (+ or -)
tz time zone (2 characters)
Protocol Identifier in numerical format: This parameter identifies the protocol used by the
receiver entity and informs the SC that the conversion from SMS to that protocol must be
done while delivering the message.
Protocol ID
Conversion towards
0
Implicit (default)
33
telex (or teletex reduced to telex format)
34
group 3 telefax
35
group 4 telefax
36
voice telephone (i.e. conversion to speech)
37
ERMES (European Radio Messaging
System)
38
National Paging system (known to the SC)
39
Videotex (T.100/T.101)
40
teletex, carrier unspecified
41
teletex, in PSPDN
42
teletex, in CSPDN
43
teletex, in analog PSTN
44
teletex, in digital ISDN