User Manual

<index> - location on the memory where SM is stored.
2 - SMS-DELIVERs (except class 2 messages and messages in the message waiting
indication group) are routed directly to the TE using the following unsolicited result code:
(PDU Mode)
+CMT: <alpha>,<length><CR><LF><pdu>
where:
<alpha> - alphanumeric representation of originator/destination number corresponding to the
entry found in MT phonebook
<length> - PDU length
<pdu> - PDU message
(TEXT Mode)
+CMT:<oa>,<alpha>,<scts>[,<tooa>,<fo>,<pid>,<dcs>,
<sca>,<tosca>,<length>]<CR><LF><data> (the information written in italics will be
present depending on +CSDH last setting)
where:
<oa> - originating address, string type converted in the currently selected character set (see
+CSCS)
<alpha> - alphanumeric representation of <oa>; used character set must be the one selected
with either command +CSCS.
<scts> - arrival time of the message to the SC
<tooa>, <tosca> - type of number <oa> or <sca>:
129 - number in national format
145 - number in international format (contains the "+")
<fo> - first octet of 3gpp 03.40/23.040
<pid> - Protocol Identifier
<dcs> - Data Coding Scheme
<sca> - Service Centre address, string type, converted in the currently selected character set
(see +CSCS)
<length> - text length
<data> - TP-User-Data
Class 2 messages and messages in the message waiting indication group (stored message)
result in indication as defined in <mt>=1.
3 - Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result codes defined
in <mt>=2. Messages of other data coding schemes result in indication as defined in <mt>=1.
<bm> - broadcast reporting option
0 - Cell Broadcast Messages are not sent to the DTE