User Manual

If the record to be deleted was already empty, no error messages will be shown, but it will be
only filled again with empty values.
You may want to dial a number previously stored in the phonebook. First, you must find the
desired phone number index position, to do it use the +CPBF command. Once the <index>
number is known, set up the device for the type of call you want to dial. Then:
 send command ATD> <index><cr>
where:
<index> is the index number of the desired PB record to be dialed.
 wait for response according to the call type you issued.
For example:
1- Let us assume you want to make a Voice call on the internal audio path MT to "Fabio"
whose number is stored on the SIM PB:
- Select the PB as active storage
command
AT+CPBS="SM"<cr>
response
OK
Now find the index number where "Fabio" is recorded:
command
AT+CPBF="Fabio"<cr>
the response may look like
+CPBF= 7,"[phone]",145,"Fabio"
OK
the first field is the index position: 7 in this case.
Now set up Voice call:
command
AT+FCLASS=8<cr>
response:
OK
AT#CAP=2 <cr>
OK
AT+CLVL=8<cr>