User Manual

OK
FD facility is now enabled
Return to select PB (see par.
5.1.1.1)
ERROR
some error occurred
Enable extended result codes (see
par. 4.4.2.1), check if the PIN2 is
correct
and retry.
+CME ERROR: 17
the inserted PIN2 is wrong
Check PIN2 code and retry.
When receiving the ERROR or +CME ERROR message, repeat Query SIM presence and
status since after 3 failed attempts SIM PIN2 is not requested anymore, SIM PUK2 is
requested instead. You may need to go through procedure 2.7.2.4 (but insert PUK2 instead of
PUK1)
First, you must select the "SM" storage as active (see par.5.1.1.1).
 send command AT+CPBF=<text><cr>
where:
<text> is the desired string to be found in the name field of the PB record.
 wait for response in the format:
+CPBF= <index>,"<number>",<type>,"<text>"
OK
where:
<index> is the record number on the PB;
<Number> is the phone number;
<type> is the type of number:
145 - international numbering scheme
129 - national numbering scheme
<text> is the alphanumeric name associated with the number or in the case no corresponding
entries are found:
+CME ERROR: 22 or simply ERROR.
The search for <text> string is not case sensitive and the string may or may not be included in
double brackets