User Manual

 send command AT+CPBS=<storage>[<,passwrod>]<cr>
where:
<storage> is the desired PB storage:
“DC” - MT dialed calls list (+CPBW may not be applicable for this storage)
“EN” - SIM/USIM (or MT) emergency number (+CPBW is not be applicable for this
storage)
“FD” - SIM/USIM fixed dialing phonebook
“LD” - SIM/USIM last dialing phonebook
“MC” - missed calls list
“MB” - mailbox numbers stored on SIM
“ME” - MT phonebook
“ON” - SIM (or MT) own numbers (MSI storage may be available through +CNUM also).
“RC” - received calls list
“SM” - SIM/USIM phonebook
<password>: string type value representing the PIN2-code required when selecting PIN2-
code locked <storage>s above, e.g. "FD" or the hidden key to be verified in order to access
to the hidden phonebook entries in the SIM/USIM or any other phonebook with hidden
entries.
 wait for response:
Response
Reason
Action
OK
selected PB is now active
Proceed ahead
ERROR
some error occurred
Enable extended result codes (see
par. 4.4.2.1)
and retry.
+CME ERROR: 10
SIM not present
Check SIM or require SIM
insertion and repeat from par.
4.4.2.2
+CME ERROR: 11
SIM is present and PIN is required
to continue operations
Insert SIM PIN (see par. 4.4.2.3)
+CME ERROR: 12
SIM is present and PUK is
required to continue operations
insert SIM PUK (see par. 0)
+CME ERROR: 13
SIM defect
Check SIM insertion or require a
new SIM not defected and repeat
from par. 4.4.2.2
+CME ERROR: 14
SIM is busy
retry later
+CME ERROR: 15
SIM is wrong type
Check SIM, it must be a GSM SIM
or UMTS SIM(USIM).
+CME ERROR: 17
PIN2 is required to continue
Enable FD facility with +CLCK