User Manual

The firmware update of the module can be performed with the Xfp Tool provided by Telit. It
runs on Windows based PCs. It erases the flash memory content, and then it downloads the
new firmware on the flash memory.
To update the Telit Module firmware, follow the procedure:
1. collect information about the Telit Module and Software version using the following AT
commands:
 AT+CGMR<cr>, returns the Software version information;
 AT+CGMM<cr>, returns the Telit Module identification.
2. Switch OFF the Telit Module.
3. Run the Xfp.exe tool, the following windows are displayed. Power OFF the module if needed
then press OK button.