User's Manual

HE910 Hardware User Guide
1vv0300925 Rev.28 – 2015-06-24
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 41 of 41
• The power supply input cables should be kept separate from noise sensitive lines
such as microphone/earphone cables.
• The insertion of EMI filter on VBATT pins is suggested in those designs where
antenna is placed close to battery or supply lines.
A ferrite bead like Murata BLM18EG101TN1 or Taiyo Yuden P/N
FBMH1608HM101 can be used for this purpose.
The below figure shows the recommended circuit: