User's Manual

HE910 Hardware User Guide
1vv0300925 Rev.9 – 07-02-2012
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 7 of 80
1.4 Document Organization
This document contains the following chapters:
provides a scope for this document, target audience, contact
and support information, and text conventions.
provides an overview of the document.
Chapter3 HE910 Module Connections
Chapter 4 How to operate on the module via hardware.
Chapter 5 Power supply requirements and general design rules.
Chapter 6 The antenna connection and board layout design are the most
important parts in the full product design.
Chapter 7 Specific values adopted in the implementation of
logic levels for this module.
Chapter 8 The USB port on the Telit HE910 is the core of the interface
between the module and OEM hardware
PI port Refers to the SPI port of the Telit HE910
Chapter 10 Refers to the serial ports of the Telit HE910
Chapter 11 Refers to the audio blocks of the Base Band Chip
of the HE910 Telit Modules.
Chapter 12 How the general purpose I/O pads can be
configured.
Chapter 13 HE910 Mechanical dimensions and
recomm
Chapter 14 Conformity Assessment Issues Information related to the Conformity
Assessments.