User's Manual

HE910 Hardware User Guide
1vv0300925 Rev.9 – 07-02-2012
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 65 of 80
13.4 Stencil
suggest a thickness of stencil foil ≥ 120 µm.
13.5 PCB pad design
Non solder mask defined (NSMD) type is recommended for the solder pads on the
PCB.
PCB
Copper Pad
Pad
Solder Mask
SMD
(Solder Mask Defined)
NSMD
(Non Solder Mask Defined)