User's Manual
HC864-AUTO Hardware User Guide
1vv0300946 Rev.4 – 2012-12-27
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 58 of 77
11.7. RTC Bypass Out
The VRTC pin brings out the Real Time Clock supply, which is separate from the rest of the
digital part, allowing having only RTC going on when all the other parts of the device are off.
To this power output a backup capacitor can be added in order to increase the RTC autonomy
during power off of the battery.
NOTE:
NO devices must be powered from this pin.
11.8. VAUX1 Power Output
A regulated power supply output is provided in order to supply small devices from the
module. This output is active when the module is ON and goes OFF when the module is shut
down. The operating range characteristics of the supply are:
Operating Range – VAUX1 power supply
Min Typical Max
Output voltage
2.6V 2.65V 2.7V
Output current
100mA
Output bypass capacitor
(Inside the module)
2.2F