User's Manual

Page 88 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.5.3.8 +CCFC - call forwarding number and conditions
+CCFC – call forwarding number and condition
Execute command
AT+CCFC =
<reason>,
<cmd>[,<number>[,<ty
pe>[,<class>][,,,<time>]
]]
Controls the call forwarding supplementary service. Registration,
erasure, activation, deactivation, and status query are supported.
Parameters:
<reason> = 0 – unconditional
<reason> = 1 - mobile busy
<reason> = 2 - no reply
<reason> = 3 - not reachable
<reason> = 4 - all calls (not with query command)
<reason> = 5 - all conditional calls (not with query command)
<cmd> = 0 – disable
<cmd> = 1 - enable
<cmd> = 2 - query status (see below for further explanations)
<cmd> = 3 – registration
<cmd> = 4 – erasure
<number>: phone number of forwarding address in format specified by
<type> parameter
<type>: type of address byte in integer format :
145 - international numbering scheme (contains the character "+")
129 - national numbering scheme
<class>: is a sum of integers each representing a class of information
which the command refers; default 7 ( voice + data + fax )
<class> = 1 - voice (telephony)
<class> = 2 - data
<class> = 4 - fax (facsimile services, from SW release C)
<time>: is the time in seconds after which the call is diverted if "no
reply" reason is chosen. Valid only for "no reply" reason.