User's Manual

Page 73 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.5.1.4 +CGSN - request product serial number identification
+CGSN – request product serial number identification
Execute command
AT+CGSN Returns the product serial number, identified as the IMEI of the
mobile.
Read command
Write command
Test command
Example
Reference GSM 07.07
SW release Version A
2.5.1.5 +CSCS - select TE character set
+CSCS – select TE character set
Execute command
Read command
AT+CSCS? Returns the current value of the active character set.
Write command
AT+CSCS <chset> Sets the current character set used by the device.
Parameter: <chset> = "IRA" - char set
Note: The only character set supported yet is the
ITU–T.50 ( IRA)
Test command
AT+CSCS=? Returns the supported values of the parameter chset. Yet only
IRA is supported.
Example
Reference GSM 07.07
SW release Version A