User's Manual

Page 71 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.7.11 S30 - disconnect inactivity timer
S30 –disconnect inactivity timer
Execute command
Read command
Write command
ATS30 = <min> Defines the inactivity timeout timer value in minutes. The Device
disconnects if no characters are exchanged for a time period of at
least S30 minutes.
Parameter:
<min> - 0-127 minutes
<min> = 0 - means inactivity timer disabled, hence no
disconnect on inactivity feature is enabled.
Note: Default is 0
Test command
Example
Reference
SW release Version A
2.4.7.12 S38 - delay before forced hang up
S38 –delay before forced hang up
Execute command
Read command
Write command
ATS38 = <sec> Defines the time in seconds that the device waits after a hang up
command for transmit buffer to be emptied. 255 value means that
disconnecting is done only after complete buffer upload.
Parameter: <sec> - 0-255 s
Note: Default is 20 s
Test command
Example
Reference
SW release Version A