User's Manual
Table Of Contents
Page 70 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.7.9 S12 - escape prompt delay
S12 – escape prompt delay
Execute command
Read command
Write command
ATS12 = <time> Defines the guard time of silence before and after the escape
sequence in order to accept it as a valid one.
Parameter: <time> - 20-255 fiftieth of seconds
Note: default is 50 (1 second )
Test command
Example
Reference
SW release Version A
2.4.7.10 S25 - delay to DTR off
S25 –delay to DTR off
Execute command
Read command
Write command
ATS25 = <time> Defines how long the DTR must be off to consider the high to
low transition as a valid one.
Parameter: <time> - 1-255 hundredth of seconds
Note: default is 5 ( 5 hundredth of second)
Test command
Example
Reference
SW release Version A