User's Manual

Page 69 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.7.7 S7 - wait time for carrier, silence or dial tone
S7 – wait time for carrier, silence or dial tone
Execute command
Read command
Write command
ATS7 = <sec> S7 sets the length of time in seconds that the device will wait for
carrier before hanging up the call. The timer is started when the
device finishes dialing (originate), or 2 seconds after going off-
hook.
Parameter: <sec> - 1-255
Note: Default is 60 seconds
Test command
Example
Reference V25ter
SW release Version A
2.4.7.8 S10 - lost carrier to hang up delay
S10 – lost carrier to hang up delay
Execute command
Read command
Write command
ATS10 = <time> S10 defines the maximum time allowed to a carrier loss before
disconnecting.
Parameter: <time> - tenth of seconds 1-255
Note: default is 50 (5 seconds).
Test command
Example
Reference V25ter
SW release Version A