User's Manual

Page 68 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.7.5 S4 - line feed character
S4 – line feed character
Execute command
Read command
Write command
ATS4 = <char> Sets the character recognized as line feed character.
Parameter: <char> - line feed character 0-127
Note: Default 10 (Line Feed). The line feed character is output
after carriage return character if verbose result codes are used
( V1 option used ).
Test command
Example
Reference V25ter
SW release Version A
2.4.7.6 S5 - backspace character
S5 – backspace character
Execute command
Read command
Write command
ATS5 = <char>
Sets the decimal ASCII character that is recognized as backspace
character.
Parameter: <char> - backspace character 1-127
Note: Default 8 ( backspace )
Test command
Example
Reference V25ter
SW release Version A