User's Manual

Page 67 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.7.3 S2 - escape character
S2 – escape character
Execute command
Read command
Write command
ATS2 = <char> S2 holds the decimal value of the ASCII character used as escape
character. This command sets this character equal to <char>.
Parameter: <char> - escape character 0-255
Note: The escape sequence consists of three escape characters
preceded by n ms of idle and followed by m ms of idle.
Test command
Example
Reference
SW release Version A
2.4.7.4 S3 - carriage return character
S3 – carriage return character
Execute command
Read command
Write command
ATS3 = <char>
Sets the command line and result code terminator character in
decimal ASCII.
Parameter: <char> - carriage return character 0-127
Note: Default 13 (Carriage Return)
Test command
Example
Reference V25ter
SW release Version A