User's Manual

Page 55 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.2.13 +ILRR - DTE - modem rate reporting
+ILRR – DTE-modem rate reporting
Execute command
Read command
AT+ILRR? Returns active setting of port speed rate reporting information.
Write command
AT+ILRR = <n> Controls whether or not the +ILRR:<rate> information text is
transmitted from the GM862-PCS to the DTE.
Parameter:
<n> = 0 - local port speed rate reporting disabled
<n> = 1 - local port speed rate reporting enabled
Note: this information if enabled is sent upon connection.
Test command
AT+ILRR=? Returns all supported values of the parameter <n>
Example
Reference V25ter
SW release Version A