User's Manual

Page 47 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.1.18 %L - report line signal level
%L – report line signal level
Execute command
AT%L
Reports the line signal level.
Note: Since on mobile phone there's no line connection, command is
included only for compatibility and returns only OK.
To check signal strength (level) use the +CSQ command.
Read command
Write command
Test command
Example
Reference
SW release Version A
2.4.1.19 %Q - report line quality
%Q – report line quality
Execute command
AT%Q
Reports the line quality indicator.
Note: Since on mobile phone there's no line connection, command is
included only for compatibility and returns only OK.
To check signal quality use the +CSQ command.
Read command
Write command
Test command
Example
Reference
SW release Version A