User's Manual
Table Of Contents
Page 45 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4.1.14 &V0 - display current configuration & profile
&V0 – display current configuration & profile
Execute command
AT&V0
Returns all the configuration parameters settings.
Note: this command is the same as &V, it is included only for
backwards compatibility.
Read command
Write command
Test command
Example
Reference
SW release Version A
2.4.1.15 &V1 - display S registers values
&V1 – display S registers values
Execute command
AT&V1
Returns the value of the S registers in decimal and hexadecimal value in the
format:
REG DEC HEX
<reg> <dec> <hex>
where
<reg> - S register number (0 .. 52)
<dec> - current value in decimal notation
<hex> - current value in hexadecimal notation
Read command
Write command
Test command
Example
Reference
SW release Version A