User's Manual

Table Of Contents

Page 41 of 187

TECHNICAL MANUAL

Telit GM862 PCS

Tri Band GPRS Data Terminal System Rev.1

2.4.1.5 &W - store current configuration

&W – store current configuration

Execute command

AT&W <n> Stores on profile n the complete configuration of the device.

Parameter: <n> = 0…1 - profile

Read command

Write command

Test command

Example

Reference

SW release Version A

2.4.1.6 &Z - store telephone number in the Telit GM862-PCS module internal

phonebook

&Z – store telephone number in the GM862-PCS internal phonebook

Execute command

AT&Z <n> = <nr> The GM862-PCS has a built in non volatile memory in which telephone

numbers of a maximum 24 digits can be stored. The command AT&Z <n> =

<nr> stores in the record n the telephone number nr. The records cannot be

overwritten, they must be cleared before rewriting.

Parameter:

<n>: phonebook record <nr>: telephone number

Note1: To delete the record <n> the command AT&Z<n>= must be issued.

Note2: The records in the GM862-PCS memory can be viewed with the