User's Manual

Page 39 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.4 Hayes Compliant AT Commands
2.4.1 Generic Modem Control
2.4.1.1 &F - restore factory configuration
&F – restore factory configuration
Execute command
AT&F Calls the factory configuration, resetting the default profile.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A
2.4.1.2 Z - soft reset
Z – soft reset
Execute command
ATZ <n>
Send a software reset to device, loading on the configuration the specified
default profile.
Parameter: <n > = 0…1 - profile
Note: Must be the last command on the line.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A