User's Manual

Page 183 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.10.1.5 #CSQUAL – Camera Select Quality of Photo
#CSQUAL - Camera Select Quality of Photo
Execute command
Read command
AT#CSQUAL?
Reports the current value of the parameter <qual>
Write command
AT#CSQUAL=<qual> This command sets the quality of the photo stored on the memory of
the GM862-PCS
Parameter:
<qual> - photo quality
0 - low (Jpeg compression high - low quality of picture)
1 - medium (Jpeg compression medium - med. quality of picture)
2 - high ( Jpeg compression low - high quality of picture) - default
Test command
AT#CSQUAL=? Returns the allowed values for the parameters.
NOTE Increasing the photo quality increases its size.
Example AT#CSQUAL=2
OK
Reference Telit specifications
SW release Version D