User's Manual
Table Of Contents
Page 180 of 187
TECHNICAL MANUAL
Telit GM862 PCS
Tri Band GPRS Data Terminal System Rev.1
2.9.4.10 #SKTRST – Socket Parameters Reset Command
#SKTRST – Socket Parameters Reset Command
Execute command
AT#SKTRST
Resets the actual Parameters of the Socket in the NVM of the device to
the default ones.
The values reset are:
- User Name (none)
- Password (none)
- Packet Size
- Socket inactivity timeout
- Data sending timeout
- Socket type (UDP/TCP)
- Remote port (none)
- Remote address (none)
Read command
Write command
Test command
Example AT#SKTRST
OK
…socket parameters have been reset
Reference Telit specifications
SW release Version C